Moxa Technologies ioLogik E2210, User Manual

Page: 70 / 144

ioLogik E2200 Series Using ioAdmin
3-39
ioLogik E2242 Network I/O Server Configuration
==============================================
[System Information]
Date: 2010/04/07
Time: 06:10:56
Firmware: V3.4 Build10032218
Click&Go=2.1
MOS= V3.2.34
[1. Model]
----------
MOD_TYPE=E2242 - Active Ethernet I/O Server (12DIO + 4AI)
MOD_LOC=
MOD_NAME=
[2. I/O Configurations]
-----------------------
DI00=1,(Counter),
DI00_PWN=0,(Stop), DI00_SAFE=0,(Stop),
DI00_FILTER=1,(0.500ms), DI00_TRIGGER=0,(L2H),
DI01=0,(DI), DI01_FILTER=100,(50.000ms)
DI02=0,(DI), DI02_FILTER=100,(50.000ms)
DI03=0,(DI), DI03_FILTER=100,(50.000ms)
DI04=0,(DI), DI04_FILTER=100,(50.000ms)
DI05=0,(DI), DI05_FILTER=100,(50.000ms)
DO06=1,(Pulse),
DO06_PWN=0,(Stop),
DO06_SAFE=0,(Stop), DO06_LOW=2,(5.000ms),
DO06_HIGH=2,(5.000ms), DO06_CNT=2000
DO07=1,(Pulse), DO07_PWN=1,(Start),
DO07_SAFE=1,(Start), DO07_LOW=1,(5.000ms),
DO07_HIGH=1,(5.000ms), DO07_CNT=0
DO08=0,(DO), DO08_PWN=0,(Off), DO08_SAFE=0,(Off)
DO09=0,(DO), DO09_PWN=0,(Off), DO09_SAFE=0,(Off)
DO10=0,(DO), DO10_PWN=0,(Off), DO10_SAFE=0,(Off)
DO11=0,(DO), DO11_PWN=0,(Off), DO11_SAFE=0,(Off)
AI00=5,(4-20mA),
AI00_EN=1
AI01=3,(+/-10V), AI01_EN=1
AI02=3,(+/-10V), AI02_EN=1
AI03=3,(+/-10V), AI03_EN=1
AI00_SCALEN=0, AI00_ACTmin=0.000, AI00_ACTmax=0.000,
AI00_SCALmin=0.000, AI00_SCALmax=0.000,
AI00_UNIT=V
AI01_SCALEN=0, AI01_ACTmin=0.000, AI01_ACTmax=0.000,
AI01_SCALmin=0.000, AI01_SCALmax=0.000,
AI01_UNIT=V
AI02_SCALEN=0, AI02_ACTmin=0.000, AI02_ACTmax=0.000,
AI02_SCALmin=0.000, AI02_SCALmax=0.000,
AI02_UNIT=V
AI03_SCALEN=0, AI03_ACTmin=0.000, AI03_ACTmax=0.000,
AI03_SCALmin=0.000, AI03_SCALmax=0.000,
AI03_UNIT=V
AI00_SCALE2_M=1.000, AI00_SCALE2_D=0.000,
AI01_SCALE2_M=1.000, AI01_SCALE2_D=0.000,
AI02_SCALE2_M=1.000, AI02_SCALE2_D=0.000,
AI03_SCALE2_M=1.000, AI03_SCALE2_D=0.000,
Import System Config
Select this command to load a configuration for the selected ioLogik from a configuration text file. You will need
to be logged in as an administrator to use this command. The new configuration will not take effect until the
ioLogik has been restarted. This command can be used to restore a configuration after loading the factory
defaults, or to duplicate a configuration to multiple ioLogik units.