ioLogik E2200 Series
Using ioAdmin
3-38
Server Context Menu
The Server context menu is accessed by right clicking on the server model name in the navigation panel.
Connect
Select this command to try connecting over the network to the selected ioLogik.
Disconnect
Select this command to drop the network connection with the selected ioLogik.
Delete I/O Server
Select this command to remove the selected ioLogik. The ioLogik must be disconnected first.
Add Serial I/O Server
Select this command to add an ioLogik I/O server by specifying its Unit ID.
Restart System
Select this command to restart the selected ioLogik. You will need to be logged in as an administrator to use this
command.
Reset to Default
Select this command to reset all settings on the selected ioLogik, including console password, to factory default
values. You will need to be logged in as an administrator to use this command.
Export System Config
Select this command to export the selected ioLogik’s configuration to a text file. You will need to be logged in
as an administrator to use this command. It is strongly recommended you use this method to back up your
configuration after you have finished configuring the ioLogik for your application.
The following is a sample configuration file:
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...
