ioLogik E2200 Series
Initial Setup
2-12
ATTENTION
Since there are major functional differences between firmware versions, exporting the configuration file
requires a longer processing time.
Adjust the
TCP Socket Timeout Interval
to
30 seconds
when using
ioAdmin 3.10 or above, especially if earlier versions of ioAdmin have been installed and then removed.
Import System Config
Select this command to load a configuration for the selected ioLogik from a configuration text file. The new
configuration will not take effect until the ioLogik has been restarted. This command can be used to restore a
configuration after loading the factory defaults, or to duplicate a configuration to multiple ioLogik units.
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...
