ioLogik E2200 Series
Using ioAdmin
3-6
Network Interface
Network Interface
allows you to select a network interface to use (if the PC has multiple network adaptors
installed). The default network interface will be the same as the Windows setting. Make sure the interface is
correct when connecting to the ioLogik device; otherwise, no devices will be found.
I/O Status Refresh Rate
This operation is used to adjust how often the ioLogik is polled for device status by the ioAdmin utility. The
current rate is displayed on the status bar at the bottom of the window.
Note: The higher sync rates result in higher loads on the network.
TCP Socket Timeout Interval
This operation allows you to select the preferred timeout value for TCP socket communication. When the
ioLogik's E2200 connection to the server exceeds a specified time period the device will automatically release
its modbus/TCP connection to the server, to free up the port for the next connection (default: 30 seconds).
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...
