ioLogik E2200 Series
Using the Web Console
5-13
Channels 8 through 15 are virtual channels. You can click on a virtual channel to configure whether it will return
current averages or deviations for the specified physical channels (TC-00 through TC-07).
System Management
Under system management you can set IP accessibility and SNMP Agent. You can also check your network
connection and do firmware update. Also you Import and Export your system configuration under here too.
1.
2.
3.
4.
5.
6.
Accessible IP Settings
On the
Accessible IP Settings
page, you can control network access to the ioLogik by allowing only specific
IP addresses. When the accessible IP list is enabled, a host’s IP address must be listed in order to obtain access
to the ioLogik.
You can add a specific address or range of addresses by using a combination of IP address and netmask, as
follows:
•
To allow access to a specific IP address
Enter the IP address in the corresponding field; enter 255.255.255.255 for the netmask
•
To allow access from hosts on a specific subnet
For both the IP address and netmask, use 0 for the last digit (e.g., 192.168.1.0 and 255.255.255.0).
•
To allow unrestricted access
Deselect the Enable the accessible IP list option.
The following table shows additional configuration examples.
Allowed Hosts
IP address
Netmask
Any host
Disable
Disable
192.168.1.120
192.168.1.120
255.255.255.255
192.168.1.1 to 192.168.1.254
192.168.1.0
255.255.255.0
192.168.0.1 to 192.168.255.254
192.168.0.0
255.255.0.0
192.168.1.1 to 192.168.1.126
192.168.1.0
255.255.255.128
192.168.1.129 to 192.168.1.254
192.168.1.128
255.255.255.128
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...
