Moxa Technologies ioLogik E2210, User Manual

Page: 13 / 144

ioLogik E2200 Series Introduction
1-8
ioLogik E2240 Specifications
Inputs and Outputs
Analog Inputs: 8 channels
Analog Outputs: 2 channels
Analog Input
Type: Differential input
Resolution: 16 bits
I/O Mode: Voltage / Current
Input Range: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Sampling Rate:
All channels:
• 10 samples/sec for voltage
• 6 samples/sec for current
Per channel:
• 1.25 samples/sec for voltage
• 0.75 samples/sec for current
Single channel:
• 1.25 samples/sec for voltage
• 0.75 samples/sec for current
Input Impedance: 900K ohms (min.)
Built-in Resistor for Current Input: 120 ohms
Isolation: 3K VDC or 2K Vrms
Analog Output
Resolution: 12 bits
Output Range: 0 to 10 V, 4 to 20 mA
Drive Voltage: 15 VDC for current output
Accuracy:
±0.1% FSR @ 25°C,
±0.3% FSR @ -10 and 60°C,
±0.5% FSR @ -40 and 75°C
Load Resistor: Less than 250 ohms
Power Requirements
Power Consumption: 198 mA @ 24 VDC
MTBF (mean time between failure)
Time: 155,941 hrs
Database: Telcordia (Bellcore)