ioLogik E2200 Series
Using the Web Console
5-16
ATTENTION
If you forget the password, the ONLY way to configure the ioLogik is by using the reset button to load the
factory defaults.
Before you set a password for the first time, it is a good idea to export the configuration to a file when you have
finished setting up your ioLogik. Your configuration can then be easily imported back into the ioLogik. This will
be useful if the ioLogik has been reset to factory defaults due to a forgotten password or for other reasons.
Load Factory Default
This function will reset the ioLogik to factory default settings. All previous settings, including the password, will
be lost.
Save/Restart
If you change the configuration, do not forget to reboot the system.
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...
