ioLogik E2200 Series
Using the Web Console
5-5
I/O Settings
You can view the settings for DI and DO channels in the web console. DIO channels will be listed according to
the configured channel type (DI or DO).
ioLogik 2210 (above pic)
1.
2.
3.
4.
5.
6.
7.
8.
DI Channels
On the
DI Channels
page, you can view the status of each DI (digital input) channel. Only DIO channels that
are acting as DI channels will be displayed.
Click on a channel to see that channel’s configuration options. DI channels can operate in DI mode or Event
Counter mode. Software filtering is used to control switch bounces. The filter is configurable in multiples of 0.5
ms and accepts values between 1 and 65535. For example, a setting of
2
would mean a 1 ms filter (2 × 0.5
ms).
NOTE
DI/DO mode must be configured via ioAdmin.
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...