manualshive.com logo in svg

Motorola DigitalDNA ColdFire MCF5272, User Manual

The user manual for the high-performance Motorola DigitalDNA ColdFire MCF5272 can be easily downloaded for free from our website. This comprehensive manual provides step-by-step instructions and detailed information on operating this advanced product. Unlock the full potential of your MCF5272 through our hassle-free online manual download.

Share
Download
background image

 

Chapter  1.  Overview

 

  

1-5

 

MCF5272 Architecture

 

The Version 2 ColdFire core has a 32-bit address bus and a 32-bit data bus. The address bus
allows direct addressing of up to 4 Gbytes. It supports misaligned data accesses and a bus
arbitration unit for multiple bus masters. 

The Version 2 ColdFire supports an enhanced subset of the 68000 instruction set. The MAC
provides new instructions for DSP applications; otherwise, Version 2 ColdFire user code
runs unchanged on 68020, 68030, 68040, and 68060 processors. The removed instructions
include BCD, bit field, logical rotate, decrement and branch, integer division, and integer
multiply with a 64-bit result. Also, four indirect addressing modes have been eliminated. 

The ColdFire 2 core incorporates a complete debug module that provides real-time trace,
background debug mode, and real-time debug support. 

 

1.2.2  System Integration Module (SIM)

 

The MCF5272 SIM provides the external bus interface for the ColdFire 2 architecture. It
also eliminates most or all of the glue logic that typically supports the microprocessor and
its interface with the peripheral and memory system. The SIM provides programmable
circuits to perform address-decoding and chip selects, wait-state insertion, interrupt
handling, clock generation, discrete I/O, and power management features.

 

1.2.2.1  External Bus Interface

 

The external bus interface (EBI) handles the transfer of information between the internal
core and memory, peripherals, or other processing elements in the external address space. 

 

1.2.2.2  Chip Select and Wait State Generation

 

Programmable chip select outputs provide signals to enable external memory and
peripheral circuits, providing all handshaking and timing signals for automatic wait-state
insertion and data bus sizing.

Base memory address and block size are programmable, with some restrictions. For
example, the starting address must be on a boundary that is a multiple of the block size.
Each chip select is general purpose; however, any one of the chip selects can be
programmed to provide read and write enable signals suitable for use with most popular
static RAMs and peripherals. Data bus width (8-bit, 16-bit, or 32-bit) is programmable on
all chip selects, and further decoding is available for protection from user mode access or
read-only access.

 

1.2.2.3  System Configuration and Protection

 

The SIM provides configuration registers that allow general system functions to be
controlled and monitored. For example, all on-chip registers can be relocated as a block by
programming a module base address, power management modes can be selected, and the
source of the most recent RESET or BERR can be checked. The hardware watchdog
features can be enabled or disabled, and the bus time-out period can be programmed.

Summary of Contents for DigitalDNA ColdFire MCF5272







































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DigitalDNA ColdFire MCF5272

Rabbit 2000 Designers Handbook preview
2000
Brand: Rabbit Pages: 45
Rabbit 2000 Instruction & Reference Manual preview
2000
Brand: Rabbit Pages: 174
Rabbit 2000 Getting Started preview
2000
Brand: Rabbit Pages: 43
Cabletron Systems Netlink FRX4000 Installation And Setup Manual preview
Netlink FRX4000
Brand: Cabletron Systems Pages: 8
Cabletron Systems 9C300-1 Upgrade Instructions preview
9C300-1
Brand: Cabletron Systems Pages: 4
VAF instruments 667 Instructions For Installation, Operation And Maintenance preview
667
Brand: VAF instruments Pages: 56
Salus PL07 Instruction Manual preview
PL07
Brand: Salus Pages: 16
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Brand: Javad Pages: 35
Intel Itanium 9010 Manual preview
Itanium 9010
Brand: Intel Pages: 108
Waves MaxxBCL Manual preview
MaxxBCL
Brand: Waves Pages: 41
ebm-papst D3G146-LT13-30 Operating Instructions Manual preview
D3G146-LT13-30
Brand: ebm-papst Pages: 11
YASKAWA PG-Z2 Instructions Manual preview
PG-Z2
Brand: YASKAWA Pages: 15
DAD DXZ48 User Manual preview
DXZ48
Brand: DAD Pages: 16
Addonics Technologies ADSA2 Installation Manual preview
ADSA2
Brand: Addonics Technologies Pages: 1
red lion Yaskawa 2000 Information Sheet preview
Yaskawa 2000
Brand: red lion Pages: 5
A4Tech RH-10 User Manual preview
RH-10
Brand: A4Tech Pages: 8
Cabletron Systems MMAC-Plus 9G536-04 User Manual preview
MMAC-Plus 9G536-04
Brand: Cabletron Systems Pages: 42
Renesas R0E001000ACB00 User Manual preview
R0E001000ACB00
Brand: Renesas Pages: 4

Brands by name

Popular brands

Load more brands