manualshive.com logo in svg

Motorola DigitalDNA ColdFire MCF5272, User Manual

The user manual for the high-performance Motorola DigitalDNA ColdFire MCF5272 can be easily downloaded for free from our website. This comprehensive manual provides step-by-step instructions and detailed information on operating this advanced product. Unlock the full potential of your MCF5272 through our hassle-free online manual download.

Share
Download
background image

xlii

MCF5407 User’s Manual

Suggested Reading  

•

Chapter 21, “IEEE 1149.1 Test Access Port (JTAG),” describes configuration and 
operation of the MCF5272 Joint Test Action Group (JTAG) implementation. It 
describes those items required by the IEEE 1149.1 standard and provides additional 
information specific to the MCF5272. For internal details and sample applications, 
see the IEEE 1149.1 document.

•

Chapter 22, “Mechanical Data,” provides a functional pin listing and package 
diagram for the MCF5272. 

•

Chapter 23, “Electrical Characteristics,” describes AC and DC electrical 
specifications and thermal characteristics for the MCF5272. Because additional 
speeds may have become available since the publication of this book, consult 
Motorola’s ColdFire web page, http://www.motorola.com/coldfire, to confirm that 
this is the latest information.

This manual includes the following two appendixes:

•

Appendix A, “List of Memory Maps,” provides the entire address-map for 
MCF5272 memory-mapped registers. 

•

Appendix B, “Buffering and Impedance Matching,” provides some suggestions 
regarding interface circuitry between the MCF5272 and SDRAMs.

This manual also includes an index.

Suggested Reading

This section lists additional reading that provides background for the information in this
manual as well as general information about the ColdFire architecture. 

General Information

The following documentation provides useful information about the ColdFire architecture
and computer architecture in general:

ColdFire Documentation

The ColdFire documentation is available from the sources listed on the back cover of this
manual. Document order numbers are included in parentheses for ease in ordering.

•

ColdFire Programmers Reference Manual, R1.0 (MCF5200PRM/AD)

•

User’s manuals—These books provide details about individual ColdFire 
implementations and are intended to be used in conjunction with The ColdFire 
Programmers Reference Manual. These include the following:

— ColdFire MCF5102 User’s Manual (MCF5102UM/AD)

— ColdFire MCF5202 User’s Manual (MCF5202UM/AD) 

— ColdFire MCF5204 User’s Manual (MCF5204UM/AD)

— ColdFire MCF5206 User’s Manual (MCF5206EUM/AD)

Summary of Contents for DigitalDNA ColdFire MCF5272







































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DigitalDNA ColdFire MCF5272

Nvidia nForce 680I LT SLI Hardware User Manual preview
nForce 680I LT SLI
Brand: Nvidia Pages: 80
ekwb EK-FB GA AX370 Gaming RGB Monoblock Installation Manual preview
EK-FB GA AX370 Gaming RGB Monoblock
Brand: ekwb Pages: 2
Freescale Semiconductor FRDM-STBC-SA9500 Quick Reference Card preview
FRDM-STBC-SA9500
Brand: Freescale Semiconductor Pages: 2
SIIG FireWire 800 + Hi-Speed USB Combo Quick Installation Manual preview
FireWire 800 + Hi-Speed USB Combo
Brand: SIIG Pages: 20
Zhone IMACS Network Device Product Manual preview
IMACS Network Device
Brand: Zhone Pages: 114
Datasat DDR-16 AES67 Installation And Operating Manual preview
DDR-16 AES67
Brand: Datasat Pages: 24
IBM Power System H924 Installing Instructions preview
Power System H924
Brand: IBM Pages: 48
AMD Geode LE-366 User Manual preview
Geode LE-366
Brand: AMD Pages: 45
ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual preview
NetVanta Analog Modem Dial Backup Interface Module
Brand: ADTRAN Pages: 2
ZALMAN CNPS 4X User Manual preview
CNPS 4X
Brand: ZALMAN Pages: 16
LaCie FireWire 800 ExpressCard 34 Quick Install Manual preview
FireWire 800 ExpressCard 34
Brand: LaCie Pages: 24
Eastern Voltage Research Advanced Flame 1.0 Instruction Manual preview
Advanced Flame 1.0
Brand: Eastern Voltage Research Pages: 12
ADTRAN TRACER 5045 Manual preview
TRACER 5045
Brand: ADTRAN Pages: 9
Xilinx ML506 Quick Start Manual preview
ML506
Brand: Xilinx Pages: 29
Genexis FiberTwist XGS2420 Installation Manual preview
FiberTwist XGS2420
Brand: Genexis Pages: 7
PowerLogix PowerForce G4 '47 Installation Instructions Manual preview
PowerForce G4 '47
Brand: PowerLogix Pages: 12
Dataprobe iBoot-PDU4-C10 User Manual preview
iBoot-PDU4-C10
Brand: Dataprobe Pages: 72
ekwb EK-FC 780 GTX Lightning Installation And Mounting Manual preview
EK-FC 780 GTX Lightning
Brand: ekwb Pages: 3

Brands by name

Popular brands

Load more brands