Page 38
FOLDING
3.
Upper Input Roller - Setting the Parallelism & Pressure
The Upper Input Roller is gear driven from the Lower Input Roller & should be adjusted for
parallelism & pressure to ensure sheets are correctly aligned and controlled
On the Layside end of this roller, there is an eccentric housing which enables adjustment.
The housing is secured to the shaft using two M5 flat tip set screws.
Loosen the two Operator side Housing screws (M5 set screws) & insert two 80gsm
test strips (one each end) into the nip of the Input Rollers.
.
3.1.
FIG.3.1.A
Op Side Housing
M5 Cap Head Screw
Radial Slot
Upper Input Roller
Layside Eccentric Housing
Layside Housing Set Screws (M5)