Page 23
SYSTEM
SECTION E
DIAGNOSTICS and CALIBRATION TOOLS.
SET THE TOTAL COUNT TO ZERO.
SET THE MEASUREMENT SYSTEM (METRIC / IMPERIAL SETTINGS).
To enter the engineers tools menu.
Turn the Machine on.
Insert the Engineers Plug into the Socket located at the rear of the machine.
Select Tools on the Display and continue to select required tool.
To set the total counter to zero.
Turn the Machine on.
Insert the Engineers Plug into the Socket located at the rear of the machine.
Select Tools on the Display and select this button,
this value denotes the Machine total.
To set the measurement system for Imperial (Inch) or Metric (mm) the following procedure
Is necessary.
Turn the machine on.
Select Tools on the Display and select
‘METRIC or IMPERIAL’ by toggling the button. (white is ON).
Counter button
Autofold Pro