Page 10
SECTION A
A.4
A.5
The Operator and Lay side Columns
The Top Cover Assembly
The Operator and lay side column doors conceal the Gas struts for the Feed Bed.
To remove the doors open them up using the handles provided and remove the six screws
securing the hinge to the main frame.
To replace is the reverse procedure.
The Top Cover Assembly is hinged on top of the Machine and covers the Mechanism, this
hinges upwards to allow access to the Main Rollers, the Input Rollers and the Top Sensors.
This cover can be removed from the machine as follows.-
1.
Open the Lay Side Door as previously described.
2.
Open upwards.
3.
Peel back the sound adsorbent foam to allow access to the two posi pan head fixing
screws which can be unscrewed from the pivot shaft.
4.
From the rear of the machine slide the guard pivot shaft out taking care not to damage
the microswitch. the cover can now be removed. Take care not lose/drop the nylon washers at
each end of the pivot shaft.
To replace is the reverse procedure, ensure the micro switch is correctly set after this
procedure.
FOLDING
