Monitor TAD-214-W300, Installation Instructions & Operating Manual

Page: 49 / 80

45
10. - Advanced Set Up
10.1. - Channel Configuration (including Naming Channels)
10.1.1. - The Monitor System Channels can be set up to operate in several
formats (e.g. as an alarm channel, a monitoring channel or a switching
channel), not all channels are capable of carrying out all functions and not
all functions are available on some models. The system has a default
configuration and as detailed in section 4 in most situations connecting the
ancillaries to a compatible channel is all that will be required, Table 4.2.1
shows the default configuration.
10.1.2. - However this section details how to reconfigure channels to
provide greater flexibility to the system, as an example it may be that
more switching channels or more monitoring channels are required and
less alarm channels.
10.1.3. - Each of the channels is configured by using a configuration code,
Table 10.1.3.1. lists the configuration code, its name, the channels that can
be set to this code and a brief description of the configuration. N.B. the
‘operating state’ (i.e. Normally Closed (NC) or Normally Open (NO))of the
sensor is required, this information will be found either with the Sensor
information or by the manufacturer’s instructions.