Monitor TAD-214-W300, Installation Instructions & Operating Manual

Page: 11 / 80

7
Designed and built in the UK
Monitor was designed and is fully assembled in the UK. The components
are all of high grade and designed for use in harsh environments. The
GSM units are made from components approved by mobile phone
network providers.
What you need
All of the Monitor versions can be supplied as a standard kit, or tailored to
suit your needs. These kits are supplied with instructions should the
preference be to carry out a DIY installation. With the exception of any
holes required to pass through internal panels or trim etc. no specialist
tools are required. The fixing kit is supplied with a small flat blade
screwdriver for connecting the terminations into the control panel. Other
than this it is recommended that a suitably sized and correct format
screwdrivers and side cutters are all that is required.
Help in deciding configuration or with installation questions is available
from
Precision Navigation
+44(0)1473 327813
info@precisionnavigation.co.uk
Assistance is normally available during normal office hours (09:00 to
17:30 Mon to Fri). If no one is available at the time of your call a Voice
Mail can be left and the call will be answered within 1 working day. E-
mails will be responded to within the same time frame.
Specification
For a full specification please see the specifications section towards the
rear of this booklet.