Monitor TAD-214-W300, Installation Instructions & Operating Manual

Page: 20 / 80

16
4.6. - Siren
4.6.1. -
The siren(s) should draw no more than
1A (if using a large or multiple siren(s) results in a
load of more than 1A it is recommended to use a
Relay to operate the siren(s)). The siren will
sound for 3 minutes when the alarm is
triggered.
4.6.2. - Connect: -
POSITIVE / RED wire to one of the PowerOut terminals.
NEGATIVE / BLACK wire to terminal J (Channel 1).
4.7. - Strobe
4.7.1. -
The strobe(s) should draw no more than
1A (if using a large or multiple strobe(s) results in a
load of more than 1A it is recommended to use a
Relay to operate the strobe(s)). The strobe will
flash when the unit is triggered and will keep
flashing until the system is disarmed.
4.7.2. - Connect: -
POSITIVE / RED wire to one of the PowerOut terminals.
NEGATIVE / BLACK wire to terminal K (Channel 2).