Monitor TAD-214-W300, Installation Instructions & Operating Manual

Page: 43 / 80

39
7.12.3. - To set the period between calls and the telephone number send
the unit the following message (the example shown sets the period to 120
days and the telephone number to 00447123456789): -
7.12.3.1. - Secret, call, 120, 00447123456789
7.12.4. - To change just the period between calls leaving the telephone
number the same send the unit the following message (the example
shown sets the period between calls to 60 days without changing the
telephone number): -
7.12.4.1. - Secret, call, 60
7.12.5. - To check the current setting of automatic call send the unit the
following message: -
7.12.5.1. - Secret, call
7.13. - Configure the Battery Low Voltage Warning
7.13.1.
– The system will monitor the supply Battery and up to two further
batteries (
Monitor I will only monitor the 1 supply Battery
). If the voltage drops below a
threshold for more than 2 minutes a low voltage warning is sent to phones
with event masks (see 7.7.2) set to receive them. The default settings are
set to 11.0V for the main feed battery and 0.0 V for battery 2 and battery 3
inputs. Setting the threshold to 0 (zero) (
NOT RECOMMENDED ) disables
the battery monitoring.
7.13.2. - To set the low voltage threshold send the unit the following
message (1
st
example assumes only one set of batteries and sets the main
feed battery to 11.5V and the remaining circuits to 0.0V, 2
nd
example sets
the main feed battery to 10.5V, battery 2 to 10.V and Battery 3 to 11.5V): -
7.13.2.1. - Secret, voltage, 11.5, 0, 0
7.13.2.2. - Secret, voltage, 10.5, 10, 11.5
7.13.3.
– To check the thresholds send the unit the following message: -
7.13.3.1. - Secret, voltage