110
/132
MxEasy User Manual: Further Information
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
•
MOBOTIX ExtIO
: This expansion module, which is compatible with all MOBOTIX IT
and Secure models, can be used to set up a separate door intercom via a USB or
Ethernet cable in addition to the camera (USB: max. 5 m/16 ft, Ethernet: max. 100 m/110 yd,
Mx2wire: max. 500 m/550 yd). The integrated buttons act as a call button and a
light switch, and speech is transmitted over the microphone and speakers of the
ExtIO. A key switch can be integrated into one of the two signal inputs, for example.
Using the key switch, the system can be manually activated and deactivated. The
other input is used to transfer the signals of an additional sensor (for example, a
second motion detector). The two external consumers (for example, door opener
and light) are controlled using relays.
Further information on the MOBOTIX ExtIO is available at
www.mobotix.com
under
Products > ExtIO
.
•
MOBOTIX Mx2wire
: This expansion
module allows using two-wire cabling
to establish
network connections
with PoE power supply for MOBOTIX
cameras and other network devices
for distances of up to 500 m/550 yd
(two modules required). Mx2wire
modules can thus be used to convert existing two-wire cables (bell wires, coax
cables, power lines, etc.) to multimedia network connections.
Further information on the MOBOTIX Mx2wire is available at
www.mobotix.com
under
Products > Mx2wire
.
•
Joystick:
A joystick with three axes (two axes via the control stick and one axis via
the rotating grip) and memory buttons for frequently used camera positions simplify
the handling of the MOBOTIX system if users need to make frequent use of zoom
functions to access saved camera positions.
•
Key Switch:
A key switch can be connected to one of the signal inputs of the MOBOTIX
camera or ExtIO to allow for quick activation and deactivation of your MOBOTIX system.
