Mobotix MxEasy User Manual Download Page 50

Page: 50 / 132

/132

MxEasy User Manual: Getting Started

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [email protected]

Note

These settings apply for all recordings. You cannot make separate settings for each
recording time period.

3.5 Image Sections And Digital Zoom Functions (PTZ)

With MxEasy, you can use digital zoom to scale the displayed image up or down and
pan the modified image area from side to side or tilt it up and down. These functions are
called

PTZ functions

(Pan/Tilt/Zoom).

3.5.1 Zooming The Image Section

You can use the following options to operate the zoom functions:

• Roll the mouse wheel forward in order to zoom in on the image. Roll the mouse

wheel backward in order to zoom out from the image.

• Press and hold the

alt

key (Windows) and use the mouse to draw a rectangle in the live

image. MxEasy displays the selected image section in the main window.

Note

This zoom function is

not

available for the live image display of MOBOTIX

Hemispheric cameras.

• Press and hold the

command key

. Press the buttons or in order to scale the

visible image section up or down.

ctrl+#

shows the full image again.

• Rotate the control stick of the joystick to zoom in on or zoom out from the image.

Note

If you are using a joystick, make sure that you have properly configured it

before

you start MxEasy.

Summary of Contents for MxEasy





































































































































Search results

Summary of Contents for MxEasy

Reviews:

Related manuals for MxEasy

Brands by name

Popular brands

Mobotix MxEasy, User Manual

Search results

Summary of Contents for MxEasy

Reviews:

Related manuals for MxEasy

Brands by name

Popular brands