Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 96 / 473

PARAME
TER
IDENTIFIC
ATION
(PID) DESCRIPTION COMMON EXAMPLE OF
GENERAL SCAN TOOL
DISPLAY
21 Distance Travelled While MIL is Active MIL DIST: xxxxx km (xxxxx
miles)
2C Commanded EGR EGR_PCT: xxx.x%
2E Commanded Evaporative Purge EVAP_PCT: xxx.x%
2F Fuel Level Input FLI: xxx.x%
30 Number of warm-ups since diagnostic trouble codes cleared WARM_UPS: xxx
31 Distance since diagnostic trouble codes cleared CLR_DIST: xxxxx km (xxxxx
miles)
32 Evap System Vapor Pressure EVAP_VP: xxxx.xx Pa (xx.xxx in
H2O)
33 Barometric Pressure BARO: xxx kPa (xx.x inHg)
41 Monitor status this driving cycle
Enable status of continuous monitors this monitoring cycle:
NO means disable for rest of this monitoring cycle or not
supported in PID 01, YES means enable for this monitoring
cycle.
Enable status of continuous
monitors this monitoring cycle:
Misfire monitoring MIS_ENA: NO or YES
Fuel system monitoring FUEL_ENA: NO or YES
Comprehensive component monitoring CCM_ENA: YES
Completion status of continuous monitors this monitoring
cycle: Completion status of continuous
monitors this monitoring cycle:
Misfire monitoring MIS_COMPL: YES or NO
Fuel system monitoring FUEL_COMP: YES or NO
Comprehensive component monitoring CCM_CMPL: YES or NO
Enable status of non-continuous monitors this monitoring
cycle: Enable status of non-
continuous monitors this
monitoring cycle:
Catalyst monitoring CAT_ENA: YES or NO
Heated catalyst monitoring HCAT_ENA: NO
Evaporative system status EVAP_ENA: YES or NO
Secondary air system monitoring AIR_ENA: YES or NO
A/C system refrigerant monitoring ACRF_ENA: YES or NO
Oxygen sensor monitoring O2S_ENA: YES or NO
Oxygen sensor heater monitoring HTR_ENA: YES or NO
EGR system monitoring EGR_ENA: YES or NO
#
/7.6+2146(7'.5;56'//(+
10$1#4&&+#)0156+%5