Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 127 / 473

When the "COAST SET" switch is released, the
vehicle speed of that time is newly memorized.
Thereafter, the constant speed driving is performed
at that vehicle speed.
Also when the "COAST SET" switch is pressed for
less than 0.5 seconds, the vehicle is decelerated
1.6 km/h (1 mph) from the vehicle speed of constant
speed driving, and the decelerated vehicle speed is
newly memorized. Thereafter, the constant speed
driving is performed at that vehicle speed.
When the "COAST SET" switch is continued to be
pressed and the vehicle speed is decelerated to
approximately 40 km/h (25 mph) or less, the set
function and coast function are cancelled, and then
the constant speed driving is cancelled.
Resume function
When the "CANCEL" switch is pressed or the brake
pedal is depressed during the constant speed
driving, it cancels the constant speed driving.
Subsequently, when the "ACC RES" switch is
pressed during the driving with the vehicle speed of
approximately 40 km/h (25 mph) or more, the
constant speed driving is performed with the vehicle
speed memorized at the last cancellation of
constant speed driving.
Accel function
When the "ACC RES" switch is continued to be
pressed for 0.5 seconds or more during constant
driving, it accelerates the vehicle with specified
acceleration while the switch is pressed.
Then, when the "ACC RES" switch is released, the
vehicle speed of that time is newly memorized.
Thereafter, the constant speed driving is performed
at that vehicle speed.
Also, when the "ACC RES" switch is pressed for
less than 0.5 seconds, the vehicle is accelerated 1.6
km/h (1 mph) from the vehicle speed of constant
speed driving, and the accelerated vehicle speed is
newly memorized. Thereafter, the constant speed
driving is performed at that vehicle speed.
It is possible to keep pressing the "ACC RES"
switch until the vehicle speed is accelerated to
approximately 160 km/h (100 mph) or above.
However, after the "ACC RES" switch is released,
the vehicle speed of approximately 160 km/h (100
mph) becomes the newly memorized vehicle
speed. Thereafter, the constant speed driving is
performed at that speed.
Cancel function
When any of the following conditions is satisfied, the
constant speed driving will be cancelled.
The auto-cruise control system is stopped by the
pressing of the "ON OFF" switch.
The "CANCEL" switch is pressed.
The brake pedal is depressed.
The select lever is shifted to the "N" position.
The vehicle speed becomes 40 km/h (25 mph) or
less.
The vehicle speed is reduced 15 km/h (9 mph) or
more from the speed at which the constant speed
driving was started.
An abnormality occurs to the vehicle speed signal.
The ASC is operated.
The engine coolant temperature becomes
abnormally high.
The A/T fluid temperature becomes abnormally
high.
An abnormality occurs to the ECM.
Fail-safe function
When any of the following conditions is satisfied, the
auto-cruise control system function is stopped until
the system returns to normal. Also, when any of the
conditions is satisfied during the constant speed
driving, the constant speed driving is cancelled
immediately.
An abnormality occurs to the auto-cruise control
switch.
An abnormality occurs to the stoplight switch.
When any of the following conditions is satisfied, stop
the vehicle once and turn the ignition switch to
"LOCK" (OFF). Otherwise, even when the system
returns to normal, the auto-cruise control system
function will continue to be stopped. Also, when any
of the conditions is satisfied during the constant speed
driving, the constant speed driving is cancelled
immediately.
ECM abnormality
TP sensor abnormality
APP sensor abnormality
Diagnosis function
The diagnostic trouble code check is possible with
the "CRUISE" indicator light.
#761%47+5'%10641.5;56'/
D
%105647%6+10#0&12'4#6+10