Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 351 / 473

WINDSHIELD WIPER AND WASHER
M25100000060USA0000010000
CONSTRUCTION DIAGRAM
ZC5018650000
Windshield washer hose
Windshield wiper arm
Windshield wiper blade
Wiper link
assembly
Windshield washer tank
Windshield
washer nozzle
Windshield wiper
motor
2-speed (low/high speed) windshield wiper
The intermittent wiper features a vehicle speed-
dependent variable intermittent time system*.
Wiper motor torque has been increased to improve
kinetic performance of the wiper in the snowfall.
Wiper blade pressure has been increased to
improve the wiping performance while driving at
high speed.
The mist wiper is turned ON by operating the mist
switch in the opposite direction of the wiper switch
for easy operation. The mist wiper is equipped with
the function that quickly wipes raindrops away at
high speed when the mist switch is ON, and when
the mist switch is OFF, at low speed until the stop
position is reached. When the mist switch is briefly
turned ON, the wiper operates once at low speed.
The windshield washer is a 2-nozzle and 4-jet type.
Washer nozzle with the integral check valve has
been adopted to prevent the washer fluid from
running down, and to improve the response to
switch operation.
The washer motor for both front windshield and rear
windshield has been installed to reduce the weight.
Washer-linked wiper function* has been adopted.
The washer fluid can be injected without operating
the wiper. When the ignition switch is turned ON
while the washer switch is ON, the washer motor
operates but the wiper does not.
016'
7UKPIVJGEQPHKIWTCVKQPHWPEVKQPVJG
XGJKENGURGGFFGRGPFGPVXCTKCDNGKPVGTOKVVGPV
VKOGU[UVGOCPFVJGYCUJGTNKPMGFYKRGTHWPEVKQP
ECPDGCFLWUVGF4GHGTVQ2
DESCRIPTION OF CONSTRUCTION AND OPERATION
Intermittent control (Vehicle speed-dependent variable
':6'4+14
9+0&5*+'.&9+2'4#0&9#5*'4