Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 464 / 473

The features of the heater controller described below
have been designed for better appearance, easier
operation, and improved visibility.
Each dial for the air outlet switching, fan volume
control, and temperature adjustment has been
enlarged to improve operability.
Ring lights have been adopted to inside the dials to
improve appearance during nighttime.
A confirmation sound at switch operation has been
added.
AUTO and OFF positions of the fan volume control
dial have been exchenged with one another. This
change prevents the dial to pass the AUTO position
when the fan volume control is turned OFF, and
eliminates the necessity of manual reselection
when switching the inside/outside air selection
manually, thus improving the operability. <Vehicles
with automatic A/C>
When the air outlet switching dial and fan volume
control dial are turned to the AUTO position, the A/
C switch has been made to automatically turn ON
to improve convenience. (Using the customize
function, this function can be cancelled.) <Vehicles
with automatic A/C>
A/C COMPRESSOR
M25501000011USA0000010000
ZC600338
Discharge cavity capacity
0000
High-efficiency scrolling compressor built into the oil separation
enhance the cooling performance. Compressor discharge cavity
capacity has been expanded to reduce discharge pulse,
vibration, and noise.
A/C COMPRESSOR CLUTCH WITH THERMAL
FUSE
A thermal fuse is installed in the A/C compressor field core. If
the compressor fails, the thermal fuse will be blown due to friction
heat produced by the drive belt and locked compressor. This
deenergizes the A/C compressor clutch and allows the
compressor to run freely.
A/C-ECU
M25501000012USA0000010000
CONTROL
FORCED DEF CONTROL
When air outlet position is switched to DEF, A/C is
automatically turned ON, and outside/inside air
selection damper is set to the fresh air position to
quickly defrost the windshield screen.
MAX A/C CONTROL <Vehicles with manual A/C>
When the preset temperature is set to the maximum
cooling, the control status becomes as described
below.
Subject to control Control status
Air mix damper MAX COOL position
Air outlet mode Selected position
Air volume Selected position
Outside/inside air
selection damper
Air recirculation position
A/C switch ON
*'#6'4#+4%10&+6+10+0)#0&8'06+.#6+10
#%%1/24'5514