Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 317 / 473

OPERATION OF KEYLESS OPERATION KEY SYSTEM OPERATION
Panic alarm
system Panic button Press once (press and hold
for 1 second). Starts the panic alarm (headlights flash and
horn honks for three minutes)
Lock button,
unlock button
or panic button
Press again Stops the panic alarm in progress
ENCRYPTED CODE
ZC6002540000
ON
OFF
Keyless operation key lock or unlock button
Data
code
Four data codes are transmitted when a switch is
operated once. The encrypted code for user
identification is a combination of 0 and 1, and more
than 1 million different combinations are available. To
prevent theft by copying signal codes, the data code
includes a rolling code with the encrypted code. The
rolling code changes each time a signal is sent.
RECEIVER
The receiver is incorporated into the receiver antenna
module together with the receiving antenna. It sends
the signal the antenna received from the keyless
operation key to KOS-ECU. KOS-ECU compares this
signal with the ID code registered in it, and when they
coincided, a signal is output from ETACS-ECU. By
connecting scan tool MB991958 (M.U.T.-III sub-
assembly) to the data link connector, up to four
encrypted codes of keyless operation keys can be
registered.
FUNCTION FOR CONFIRMING ETACS-ECU (RECEIVER) OUTPUT AND OPERATION
When the ETACS-ECU receives an electric wave
signal of the identification code stored in the receiver
antenna module, the ETACS-ECU outputs LOCK/
UNLOCK signal and informs the driver of the keyless
entry system operation by flashing the light
(Answerback). Using a customization feature, the
flashing patterns for the answerback function can be
changed according to the table below. The initial setting at factory for the answerback function is as
follows: "Hazard warning light: LOCK, Flash once,
UNLOCK, Flash twice/Dome light: LOCK, Flash once,
UNLOCK, Stay on for 15 seconds/Horn: LOCK
(driver’s side door is locked), Sound once, UNLOCK,
No sound." Using a customization feature, the hazard
answerback function can be changed (Refer
to P.42B-29).
ITEM OPERATION
DOORS AND LIFTGATE LOCKED DOORS
AND LIFTGATE
UNLOCKED
ETACS-ECU (receiver) Sends lock signal Sends unlock signal
Dome light Flashes once Illuminates for 15 seconds
Turn-signal lights (RH and LH) Flashes once Flashes twice
Horn Sounds once if doors are already
locked -
KEYLESS ENTRY HAZARD LIGHT
ANSWERBACK FUNCTION
-';.'5512'4#6+105;56'/-15
$
5;56'/12'4#6+10