Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 149 / 473

STRUCTURE
With "roller type," the roller and spring are inserted
between the inner race of cylindrical surface and the
outer race with a number of tilted cam surfaces. This
type is composed of four parts.
OPERATION
When the one-way clutch is operating
When the one-way clutch rotates toward the torque
transmission direction, the rollers move toward the
narrow side of the roller chamber, which is
composed of the inner race and the outer race.
Since the narrow side of the roller chamber is
smaller than the roller diameter, the rollers are
engaged between the cam surfaces of the outer
race and the cylindrical surface of the inner race, and the inner race and the outer race rotate
together.
When the one-way clutch is not operating
When the one-way clutch rotates toward the
direction opposite to the torque transmission, the
rollers move toward the wide side of the roller
chamber, which is composed of the inner race and
the outer race. Since the wide side of the roller
chamber is larger than the roller diameter, a
clearance is created between the roller chamber
and the rollers. Therefore, the inner race and the
outer race are released.
ZC6007810000
3
4
1
2
1. Spring
2. Outer race
3. Inner race
4. Roller
VALVE BODY ASSEMBLY
M22301000208USA0000010000
The valve body assembly plays its role as the core of
the A/T which performs "shift control", "hydraulic
pressure control", and "fluid distribution to lubrication line". The components are the "body lower", "body
upper", "body inter", "separate plate", "solenoid
valve", "valve spool", "spring", and "check ball", and
all these parts require considerable precision.
Solenoid valve
There are two types of the solenoid valve adopted to
this A/T, "ON-OFF solenoid valve" and "linear
solenoid valve".
ON-OFF solenoid valve
#761/#6+%64#05#:.'
%105647%6+10#0&12'4#6+10