Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 298 / 473

DESCRIPTION OF CONSTRUCTION AND
OPERATION
SAFETY MECHANISM
If any obstacle such as a hand or a head is detected
to be pinched during a sunroof lid glass closing
operation, the sunroof lid glass is opened by
approximately 200 mm (7.9 inches) or more.
During the sunroof lid glass closing operation, by
continuing the sunroof close switch operation, the
sunroof can be forcibly closed without activating the
safety mechanism even when the obstacle is
detected to be pinched.
During the safety mechanism activation, when the
sunroof close switch is operated, the sunroof lid
glass stops. By continuing the close switch
operation, the sunroof lid glass can be forcibly
closed without activating the safety mechanism
even when the obstacle is detected to be pinched.
SUNROOF TIMER FUNCTION
ZC6002580002
t
Driver's door switch or
passenger’s door switch
OFF
ON
OFF
(Close)
ON
(Open)
Ignition switch (IG1)
Sunroof operation
(Disabled) OFF
(Enabled) ON
t: 30 Seconds
(Sunroof timer operation time)
The sunroof ECU (integrated into the sunroof motor
assembly) receives the ignition switch (IG1) signal
transmitted by ETACS-ECU. If the ignition switch
(IG1) signal turns OFF, the sunroof ECU allows the
sunroof switch to open/close (timer activation) the
sunroof for approximately 30 seconds. During the
timer operation, if the driver's or passenger’s door
open is detected from the door switch signal
transmitted by ETACS-ECU, the sunroof timer
function stops at this time.
SUNROOF MOTOR ASSEMBLY
ZC6001520000
Sunroof ECU
Drive gear
Sunroof motor
The sunroof motor assembly, which consists of the
motor main body, drive gear, and sunroof ECU, is
installed in front of the housing.
#
$1&;
570411(