Mitsubishi MOTORS Outlander 2007, Service Manual, Technical Information & Body Repair Manual Data

Page: 305 / 473

Parts name Functional description
Keyless operation key (incorporates
emergency key) The keyless operation key receives signals sent from each
interior/exterior transmitter antenna, certifies the keyless
operation key ID code, calculates the encrypted code, and
sends the reply data signal to KOS-ECU via the receiver
antenna module. When the lock/unlock switch on the keyless
operation key is pressed, corresponding signal is sent to KOS-
ECU via the receiver antenna module.
If two or more keyless operation keys registered in KOS-ECU
respond at the same time, their signals would interfere. To
avoid this interference, each signal from KOS-ECU is given
the priority*1data, and the keyless operation keys respond in
accordance with this priority.
Lock switch Driver's door Locks all the doors and the liftgate when a driver carrying the
keyless operation key presses the lock switch on the front door
outside handle or on the liftgate lock release handle.
Front passenger's
door
Liftgate
Unlock sensor Driver's door The unlock sensors incorporated in the driver’s front door
outside handles unlock driver’s the door when a driver carrying
the keyless operation key pulls the driver’s door outside handle.
Front passenger's
door
The unlock sensors incorporated in the passenger's front door
outside handles unlock all the doors and the liftgate when a
driver carrying the keyless operation key pulls the front door
outside handle.
Liftgate lock release handle Locks all the doors and the liftgate when a driver carrying the
keyless operation key presses the lock switch on the front door
outside handle or on the liftgate lock release handle.
Exterior transmitter
antenna assembly Driver's side Converts the data output from KOS-ECU via wire into a signal,
and sends it to the keyless operation key. (For the transmission
area, refer to Operation Manual - Engine Start
Function P.42B-20.)
Front passenger's
side
Interior transmitter
antenna assembly Front Converts the data output from KOS-ECU via wire into a signal,
and sends it to the keyless operation key. (For the transmission
area, refer to Operation Manual - Engine Start
Function P.42B-20.)
Rear
Antenna & tone
alarm assembly Exterior transmitter
antenna assembly
(liftgate) Converts the data output from KOS-ECU via wire into a signal,
and sends it to the keyless operation key. (For the transmission
area,
refer to Operation Manual -Door Entry
Function P.42B-8.)
Outer tone alarm The outer tone alarm sounds when:
The doors are locked or unlocked by the door entry function.
The keyless operation key is brought out of the vehicle when
the IG knob is in the "LOCK" (OFF) position and the push
switch is in other than the ON position.
The lock switch on the keyless operation switch is pressed
when the IG knob is in the "LOCK" (OFF) position and the push
switch is in other than the ON position.
-';.'5512'4#6+105;56'/-15
$
)'0'4#.+0(14/#6+10