5 - 17
5 INPUT AXIS MODULE
5.2.3 Command generation axis control data
[Word device]
Symbol
Setting item
Setting details
Setting value
Fetch cycle
Default
value
Device No.
Cd.340
Command generation
axis JOG speed
setting
Set the JOG speed of command
generation axis.
1 to 2147483647
[Command generation axis
speed units]
(Note-1)
At JOG
operation
start
0
4n
4n
(1) [Cd.340] Command generation axis JOG speed setting
(4n, 4n)
Set the JOG speed of command generation axis.
[Bit device]
Symbol
Setting item
Setting details
Setting value
Fetch cycle
Default
value
Device No.
Rq.341
Command generation
axis stop command
Set the stop command of
command generation axis.
ON : Stop requested
OFF : Stop not requested
OFF 20n
Rq.342
Command generation
axis rapid stop
command
Set the rapid stop command of
command generation axis.
ON : Rapid stop
requested
OFF : Rapid stop not
requested
Operation
cycle
OFF 20n
Rq.343
Command generation
axis forward rotation
JOG start command
Set the forward rotation JOG
start command of command
generation axis.
ON : Forward rotation
started
OFF : Forward rotation not
started
OFF 20n
Rq.344
Command generation
axis reverse rotation
JOG start command
Set the reverse rotation JOG
start command of command
generation axis.
ON : Reverse rotation
started
OFF : Reverse rotation not
started
OFF 20n
Rq.345
Command generation
axis complete signal
OFF command
Set the complete signal OFF
command of command
generation axis.
ON : Complete signal is
turned OFF.
OFF 20n
Rq.346
Command generation
axis error reset
command
Set the error reset command of
command generation axis.
ON : Error is reset.
Main cycle
OFF 20n
Rq.347
Feed current value
update request
command
Set whether update the feed
current value in speed control of
command generation axis or
not.
ON : Feed current value is
updated.
OFF : Feed current value is
0 cleared and not
updated at start
At start
OFF
20n
Rq.348
Command generation
axis FIN signal
Set the FIN signal of command
generation axis.
OFF to ON: M code
outputting
signal is turned
OFF.
ON to OFF: Transition to
the positioning
of next block.
Operation
cycle
OFF 20n
Summary of Contents for Q172DSCPU
