Mitsubishi Electric MELIPC MI5000 Series, User Manual

Page: 60 / 320

58
6 CC-Link IE Field Network FUNCTION
6.4 CC-Link IE Field Network diagnosis
Network Status Total Slave Stations (Parameter) Displays the total number of slave stations (No. of slave stations) set in "Network
Configuration Settings" under "Basic Settings".
Total Slave Stations (Connected) Displays the total number of slave stations (No. of slave stations) actually carrying out
baton pass in the CC-Link IE Field Network.
Current Link Scan Time The displayed network link scan time is displayed.
Number of Station Errors Detected Displays the number of stations with error occurrences on the displayed network.
Constant Link Scan Settings Value Displays values set in "Application Settings" "Supplementary Cyclic Settings" "Constant
Link Scan Time".
Network configuration diagram Displays CC-Link IE Field Network topology and each station status.
If the status of each station is not displayed, confirm that there is no master station or
station number duplication. (

Page 60 Network configuration diagram)
Disconnected station monitoring status Displays disconnected stations in station settings in "Basic Settings" "Network
Configuration Settings", but have never been data linked.
However, even if they have been data linked once, disconnected stations such as those
below will be displayed.
• Stations that have had network reconnection processing as a result of the cable being
removed and then reinserted or OFF to ON, or that are disconnected after reconnection
has completed
• Disconnected stations that have been removed from the network configuration by
clicking the [Update] button
"Other Modules" icons are stations that have not carried out data link.
Other than "Other Modules" icons are stations that have been disconnected after carrying
out data link.
Click the [Legend] button to confirm details of displayed icons.
Selected Station Communication Status Monitor Displays status of the station selected in "Network status". (

Page 62 Selected station
communication status monitor)
Operation Test [Communication Test] button Test communication. (

Page 63 Communications test)
[Cable Test] button Test the cable. (  Page 64 Cable test)
[Link Start/Stop] button Start/stop a link. (  Page 65 Link start/stop)
Information
Confirmation/Setting [Reserved Station Function Enable]
button Temporarily clear reserved stations and return temporarily cleared stations to reserved
stations. (

Page 67 Reserved station temporary clear/remove)
[Enable/Disable Ignore Station Errors]
button Temporarily set slave stations to error disabled stations. (

Page 69 Temporary error
disabled station settings/remove)
Item Description