manualshive.com logo in svg

Mitsubishi Electric MELIPC MI5000 Series, User Manual

Share
Download
Mitsubishi Electric MELIPC MI5000 Series User Manual Download Page 231

APPX

Appendix 2  List of Error Codes

229

A

Codes of errors detected other than by the self-diagnosis function (4000H to 4FFFH)

The following table shows the codes of errors not detected by a means other than the self-diagnosis function of this product.

Error code

Error name

Description

Corrective action

4001H

Common error

An unsupported request was executed.

• Check command data such as SLMP.
• Check the model selected by the 

engineering tool.

4002H

Common error

An unsupported request was executed.

• Check command data such as SLMP.
• Check the model selected by the 

engineering tool.

• Run again. If the same error is displayed 

again, this may indicate a hardware fault. 
Consult your local Mitsubishi 
representative.

4003H

Common error

Command for which a global request cannot 
be performed was executed.

Check command data such as SLMP.

4004H

Common error

A request was issued to the system file.

Check command data such as SLMP.

4005H

Common error

The volume of data to be handled by the 
specified request is too large.

Check command data such as SLMP.

4006H

Common error

Initial communication has failed.

When using Ethernet communication, shift 
the communication start timing.

4008H

Common error

The MELIPC is busy. (The buffer is not 
empty.)

Execute it again after a while.

4021H

File related error

The specified drive (memory) does not exist 
or there is an error.

• Check the specified drive (memory) 

status.

• Back up the data of the /ROM folder, and 

then initialize the memory.

4022H

File related error

The file with the specified file name or file 
number does not exist.

Check the specified file name and file 
number.

4023H

File related error

The file name and file number of the 
specified file do not match.

Delete the file, and then create a file again.

4024H

File related error

The specified file cannot be handled.

The specified file cannot be handled.

4025H

File related error

The specified file is currently processing a 
request from another engineering tool.

Forcibly execute the request. Or, execute it 
again once the processing from another 
engineering tool has been completed.

4027H

File related error

The specified range is larger than the file 
size.

Check the specified range, and access 
within the range.

4028H

File related error

The same file already exists.

Forcibly execute the request. Or, change 
the file name and execute the request 
again.

4029H

File related error

The specified file capacity cannot be 
reserved.

• Review the specified file capacity, and 

execute the request again.

• Delete unnecessary files of the /ROM 

folder, and then execute again.

402AH

File related error

The specified file has an error.

Back up the data of the /ROM folder, and 
then initialize the memory. Next, try writing 
the file again.

402BH

File related error

The request cannot be executed in the 
specified drive (memory).

• STOP MELIPC, and execute again.
• Delete unnecessary files of the /ROM 

folder, and then execute again.

402CH

File related error

At present, request details cannot be run.

Execute it again after a while.

4030H

Device specification error

The specified device name cannot be 
handled.

Check the specified device name.

4031H

Device specification error

• The specified device number is out of 

range.

• MELIPC does not support the specified 

device name.

• Check the specified device number.
• Check the specified device name.

4032H

Device specification error

A device name that has an error in the 
device qualification, or that can be used in 
SLMP random readout/random write (word 
unit)/monitor registration/monitor command 
(TS, TC, SS, SC, CS, CC) is specified.

• Check the specified device modification 

method.

• Check the specified device name.

Summary of Contents for MELIPC MI5000 Series

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands