manualshive.com logo in svg

Mitsubishi Electric MELIPC MI5000 Series, User Manual

Share
Download
Mitsubishi Electric MELIPC MI5000 Series User Manual Download Page 186

184

17  BASIC PARAMETERS
17.4  External Device Configuration

Displayed items

*1 ((Maximum number of connectable devices in the external device configuration) - (set connections) + 1) are connectable.
*2 Communications using SLMP communications only support TCP.
*3 Communications may not be possible in high-load network conditions such as those with simultaneous communications from multiple 

connection destinations.

*4 Own station port numbers from 1 to 1023 are normally reserved (WELL KNOWN PORT NUMBERS), and those from 61440 to 65534 

are used for other communications functions. Use of ports in are ranges 1024 to 4999 and 5010 to 61439 is recommended.

Right-click the module set in "Device List" or "Device configuration", and select "Properties" to configure 
comments in the displayed "Properties" window.
The following can be configured depending on the selected device.
 • Change to image diagram
 • Linkage of file or application

Item

Description

Setting range

[Detect Now] button

Carry out connection device automatic detection.
(

iQ Sensor Solution Reference Manual)

No.

The connection No. used to classify the user connection 
settings.

Connect in order from 1, in the 
following range.

• 1 to 16

Model name

Displays the model name of the connected external device.

Communications method

Set the communications method with external devices.

• MELSOFT connection
• SLMP

Protocol

Sets the communications protocols used with external 
devices.

• TCP

*1

• UDP

*2,*3

Fixed buffer send/receive settings

These items do not require configuration.

MELIPC

IP address

The own node IP address set in "External Device Connection 
Settings", "Own Node Settings (CH1)" "IP address settings 
(CH1)" is displayed.

Port Number

*4

Set port numbers for each connection on modules 
incorporating Ethernet.

1 to 4999, 5010 to 65534
(Default: Blank)

Sensor/device

MAC address

These items do not require configuration.

Host Name

These items do not require configuration.

IP address

Set the IP address of the external device.

0.0.0.1 to 223.255.255.254
(Default: Blank)

Port Number

Set the port number of the external device.
If using data transmission for all port numbers, then set 
65535.

1 to 65534, 65535
(Default: Blank)

Subnet mask

These items do not require configuration.

Default gateway

These items do not require configuration.

Check presence

Check the methods to confirm the presence of the other 
device when communications with the other device were not 
possible for a fixed period. If communication with the other 
device is not possible, close the connection.

• KeepAlive
• UDP
• Do not check presence

Summary of Contents for MELIPC MI5000 Series

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands