manualshive.com logo in svg

Mitsubishi Electric MELIPC MI5000 Series, User Manual

Share
Download
Mitsubishi Electric MELIPC MI5000 Series User Manual Download Page 31

2  CLOCK FUNCTION

2.4  Clock Data Synchronization Setting Function

29

2

2.4

Clock Data Synchronization Setting Function

This function synchronizes the clock managed by the Windows part and the clock managed by the VxWorks part.

Precautions

If the clock data synchronization setting is used, data is overwritten by the clock data of the synchronization origin even if the 
clock data of the synchronization destination is changed. When the time synchronization setting is used, always manipulate 
the clock of the synchronization origin.

Synchronization setting

The synchronization of clock data is configured by "Clock data synchronization setting" of "Time Setting".

Window

[Basic Parameter] 

 [Operation Related Setting] 

 [Time Setting] 

 [Clock data synchronization setting]

Displayed items

■

When the synchronization setting is not used

The clock managed by the Windows part and the clock managed by the VxWorks part run independently. Therefore, if one 
clock is changed, the other clock is not synchronized. If necessary, configure the clock data of both clocks managed by the 
Windows part and VxWorks part.

Synchronization timing

When "Use" was configured for "Clock data synchronization", clock data is synchronized at the following times.
 • Synchronization cycle
 • When the power supply of this product is turned ON
 • When the clock managed by the VxWorks part is changed

*1

*1 Synchronization occurs with a change by any of the following operations.

⋅

Time is configured by MI Configurator

⋅

Time is configured from the SNTP server

⋅

Time is configured by the C Controller module dedicated function (CCPU_SetRTC).

Item

Description

Setting range

Clock data synchronization

Configure whether to use the clock date synchronization setting.

• Use
• Do not use

(Default: Use)

Synchronization origin

Specify the clock data to be the basis of synchronization.

VxWorks part

Synchronization cycle

Specify the cycle interval to synchronize the clock data.

1 to 1440 minutes
(Default: 60 minutes)

Summary of Contents for MELIPC MI5000 Series

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands