Mitsubishi Electric MELIPC MI5000 Series, User Manual

Page: 171 / 320

17 BASIC PARAMETERS
17.1 Basic Parameter List
169
17
Displayed items
■
WDT (Watchdog Timer) settings (VxWorks part)
■
WDT (Watchdog Timer) setting (Windows part)
■ MELIPC operation upon error detection setting
■
LED display setting
■
Event history settings
Item Description Setting range parameter
No.
System WDT
settings

Set the system WDT setting (VxWorks part).

3500H
Monitoring time Set the system WDT monitoring time. 20 to 2000 [ms](10 ms
units)
(Default: 1,000 ms)
Item Description Setting range parameter
No.
System WDT
settings  Set the system WDT setting (Windows part).  6E11H
Monitoring time Set the system WDT monitoring time. 1 to 600 (s) (1 s units)
(Default: 5 s)
Item Description Setting range parameter
No.
MELIPC temperature error Set the device operation upon detection of a Main module temperature
error.
If "Shutdown" is set, the VxWorks part and Windows part shut down
when an error is detected. • Shut down
• Do not shut down
(Default: Shutdown)
3501H
Windows part stop Set operation of the Windows part when a stop state is detected due to
a Windows bluescreen, timeout detection from the Windows part
system watchdog timer. • Do not restart
• Restart
(Default: Do not restart)
Item Description Setting range parameter
No.
MAIN ERR
LED

Configure the display of the MAIN ERR LED.

3502H
Minor error
(Continue error) Set MAIN ERR LED to "Display" or "Do not display" when a minor error
(continuation error) is detected. • Display
• Do not display
(Default: Display)
Item Description Setting range parameter
No.
Save-capacity settings Set the storage capacity per event history file.
Setting a large save quantity enable saving of a larger number of
events. 2 to 2048 (KB) (1 KB units)
(Default: 128 KB) 3504H