Minolta magicolor 7300, User Manual

Page: 111 / 248

Replacing a Print Unit Assembly
103
31
Peel off the tape securing the tab at the top of protective film , and then
pull the print unit protective film straight out.
32
Pull the print unit protective film
straight out.
Attention
Be careful not to drop any toner from the protective film onto your
hands and clothes while pulling it out.
The toner is nontoxic. If you get toner on your hands, wash them in
cool water or a neutral detergent. If you get toner on your clothes,
lightly dust them off as much as possible. If some toner remains on
your clothes, use cool, not hot water, to rinse the toner off.
WARNING!
If toner gets in your eyes, immediately flush them with water, and
then seek medical attention. Material Safety Data Sheet (MSDS)
information can be found at www.minolta-qms.com (click on
“24-Hour Online Help”).
33
Place the used print unit (wrapped in the print unit disposal bag) into the
box for the new print unit.
WARNING!
Do not throw it into a fire. Toner expelled from the fire may cause
burns.
Attention
Contact toner_recycle@minolta-qms.com for recycling or
disposal information.