![background image](http://html.mh-extra.com/html/miele/g-600-series/g-600-series_technical-information_234715122.webp)
Technical Information
122
G 600/G 800
6.8.12 G
898
Programming Flow Chart
Enter
Programming Mode
To access:
Water hardness settings
Extended drying fan time (+14 minutes)
Enter
Service Mode 1
To access:
Manual step mode
Component test program
Enter
Service Mode 2
To access:
Error messages
Program index
Increased water temperature selection
Water softener (with/without)
Interim rinses
Extended water intake
Extended fan time (+45 minutes)
EGS
Table 6-62:
G 898 Programming Flow Chart
6.8.12.1 Programming
Mode
1. To access the
programming mode
,
close the door and turn the dishwasher on.
All program lights should light. If not, press the
Start/Stop
button to cancel the
program. Turn the dishwasher off.
2. Press and hold the “
+
” and
Start/Stop
buttons while turning the dishwasher on.
Successful accessing of the
programming mode
is indicated by a blinking
Salt
light and
P00
,
P01
, etc., in the display, depending on the electronic version.
4. Press the appropriate program button indicated in Table 6-63 to modify the
corresponding function.
5. Use the
Top solo
button to toggle the functions on or off.
6. After selecting options, press the
Start/Stop
button twice and turn the
dishwasher off.
Program button
Function
Options
Display
Sani Wash
Water hardness
setting
0 gpg
1
1 - 36 gpg
2 3
0
1
1 - 36 gpg
Rinse & Hold
Extended drying time
(+14 min)
4 min
2
14 min
90
91
Table 6-63:
G 898 Programming Functions
1
If “0” is displayed, the dishwasher is programmed for “without water softener”. To change to “with
water softener”, follow the steps in Service Mode 2 (Section 6.8.12.3).
2
Factory setting
3
Use 36 gpg for setting water hardness of 36 to 70 gpg.