![background image](http://html.mh-extra.com/html/miele/g-600-series/g-600-series_technical-information_234715103.webp)
Technical Information
103
G 600/G 800
Note:
The program steps can be followed with a timing chart. The activation of electrical
components can be performed as the steps are advanced.
If the main switch is switched off or the door is opened,
Service Mode 1
will be
cancelled.
6.8.6.2.1
Starting the Test Program; Program Start with Reactivation
If the "Cold pre-wash" program is started in Service Mode 1, the test program is activated.
The test program can be used to check and test all individual components and program
functions. The test program sequence is included with the wiring diagram.
After the test program has been started, the following program will always begin with
reactivation.
6.8.6.3
Service Mode 2
1. Switch off the on/off switch, close the door and turn the program selector switch
to
Stop
.
2. Press and hold the
Top solo
and
Start
buttons together while switching the
appliance on with the on/off switch.
3. Successful accessing of
Service Mode 2
is indicated by a dot (.) in the display
and illuminated
Drain
and
Intake
LEDs.
4. Turn the program selector switch to the desired setting in accordance with Table
6-33.
5. Press
Top solo
to toggle between the available options.
6. To save the option: Press
Start
twice and switch the appliance off.
Selector switch position Function
Programmable
options
Display
1 o’clock
Fault codes
n/a
F00, etc.
2 o’clock
Operating hours
n/a
First 3 digits of total
operating hours
3 o’clock
Operating hours
n/a
Last 3 digits of total
operating hours
4 o’clock
Flow meter
195 to 205
195 to 205
5 o’clock
Temperature increase
150°F
1
50
160°F 51
From program index P1
6 o’clock
Softener
With
1
60
Without 61
From program index P5
7 o’clock
Water quantity
Normal
1
70
Increased 71
Table 6-33:
G 885 Service Mode 2 Functions
1
Standard setting
6.8.6.3.1
Fault Codes - Display and Deletion
1. Access
Service Mode 2
.
2. Turn the program selector switch to the 1 o’clock position.
3. Check the display against Table 6-34.
4. To delete fault codes, access
Programming Mode
, press
Start
twice and switch the
appliance off.