Technical Information
131
G 600/G 800
program button
6.
The program button that lights along with program button
6
will indicate
the water hardness level setting.
3.
Turn the dishwasher off.
6.8.14.2 Service Mode 1
1. To access
Service Mode 1
,
open the dishwasher door and turn the dishwasher
off.
2. Press and hold program buttons
1
and
2
while turning the dishwasher on. A lit
Drain
light indicates successful accessing of
Service Mode 1.
3. Place the see-through door onto the dishwasher.
4. Select a program and trip the door lock with a screwdriver or Miele tool C6042.
The selected program will start.
5. Pressing program button
6
repeatedly will allow the technician to advance
through the program. If program button
6
is not pressed, the program steps are
carried out automatically, in their normal order.
Note:
The program chart in the wiring diagram should be used to follow the machine
functions when stepping through a program.
Note:
If not using the see-through door, access
Service Mode 1
as above. Close the
dishwasher door. After the program starts, open the door and use program button
6
to select the appropriate program step. The illuminated program button lights will
display the program step that the dishwasher is in. Each light corresponds to a
binary number. See the program sequence chart (Table 6-77). Add the numbers
represented by the lights to arrive at the program step. When the appropriate step
has been reached, the door can be closed and the program will continue.
Program Sequence Chart
Program button light 1
2
3
4 5 6
Binary number
32 16 8
4 2 1
Table 6-77:
G 818, G 658, G 858 Program Sequence Chart
Example:
Program button lights 2 and 5 are lit.
Program button light
2
= Binary code 16
Program button light
5
= Binary code 2
16 + 2 = Program step 18
Note:
The program chart in the wiring diagram should be used to follow the machine
functions when stepping through a program. As long as the dishwasher is in
Service Mode 1
, the program buttons will indicate the program step in binary code.
6.8.14.2.1 Test
Program
The
test program
is a program that allows the technician to check all of the major functions
of the dishwasher.
1. Place the see-through door onto the dishwasher.
2. Access
Service Mode 1
.
3. Trip the door lock with a screwdriver or Miele tool C6042. To start the test program, press
program button
5
.
The test program will start and advance automatically.
