Technical Information
126
G 600/G 800
Program button Function
Options
Button light status
1
Heated drying
On
2
Off
Off On
2
Water hardness setting
See Section
6.8.13.1.1
Flashing = 1 to 70 gpg
3
Water intake time
70 seconds
2
Off = 70 seconds
100 seconds
On = 100 seconds
4
Buzzer
On Off
Off On
Table 6-68:
G 803, G 643, G 843, G 663, G 863 Programming Mode
1
If no lights light up, the dishwasher is programmed to “without water softener”. To change to “with
water softener” follow the steps in Service Mode 2 (6.8.13.3).
2
Factory setting
6.8.13.1.1 Setting the Water Hardness Level
1. Measure the water hardness in grains per gallon (gpg).
2. Access
Programming Mode
3. Press program button
2
(should be flashing). If program button
2
is not flashing,
Service
Mode 2
must be accessed (Section 6.8.13.3) and the dishwasher programmed to “with
water softener”.
4.
Models with display:
Press program button 2 repeatedly until the desired water
hardness is shown in the display. Display will read “A”, followed by one or two digits (e.g.,
for a water hardness of 22, the display will read “A”, “2”, “2”).
Models without display:
Using Table 6-69 below, press the program button that
corresponds to the water hardness (e.g., for a water hardness of 10 gpg, press program
button
4
). Once the button is pressed for the selected water hardness setting, program
button
2
will flash.
5.
To save:
Press program button
6
twice. A flashing
program button
6
indicates successful
saving of data.
Water hardness (gpg)
Program button 6
Program button lit
1-5 Not
pressed
1
6-7 Not
pressed
2
8 Not
pressed
3
9-11 Not
pressed
4
12-14 Not
pressed
5
15-16 Pressed
1
17-21 Pressed
2
22-24 Pressed
3
24-31 Pressed
4
32-70 Pressed
5
Table 6-69:
G 803, G 643, G 843, G 663, G 863 Water Hardness Settings
6.8.13.1.2 Checking the Water Hardness Level
1. Access
Programming Mode
.
2.
Models with display:
Press program button
2
. The display
will indicate the current water
hardness level setting (“A”, “#”, “#”).
Models without display:
Press program button
2
. A program button (
1
to
5
)
will light,
indicating the current water hardness setting. Match the lit button to Table 6-69. If a
button does not light, press program button
6.
The program button that lights along with
program button
6
will indicate the water hardness level setting.
3. Turn the dishwasher off.
