Technical Information
114
G 600/G 800
Fault code
Program light and
status
Rinse light
status
Fault
F08
Normal Plus
Lit
Flashing
Water intake failure, heater level
switch
F09
Normal
Lit
Flashing
Heater level switch not switching
on at the end of thermal stops
Table 6-49:
G 892, G 832 Fault Code Chart
6.8.9.3.2 Stage 2
1. To
access
Stage 2
of
Service Mode 2
,
close the door and turn the dishwasher on. The
Start/Stop
light
must
be blinking. If the
Start/Stop
light is
not
blinking, press and hold
the
Start/Stop
button for at least 3 seconds to exit the cycle. The
Start/Stop
light should
now be blinking.
2. Press and hold the
Start/Stop
button while turning the dishwasher on. Release the
Start/Stop
button and immediately press it 2 more times. Flashing
Intake/Drain
and
Salt
lights indicate successful accessing of
Service Mode 2
.
3. Press
the
Top solo
button once. Flashing
Intake/Drain
and
Salt
lights and a lit
Drying
light indicate successful accessing of
Stage 2
of
Service Mode 2
.
4. Use
the
Program Index
chart (Table 6-50) to determine the electronic version.
5. To save, press the
Top solo
button twice.
Index
Program button
Status
P0
Pots & Pans
Lit
P1
Sani Wash
Lit
P2
Normal Plus
Lit
P3
Normal
Lit
Table 6-50:
G 892, G 832 Program Indices
6.8.9.3.3 Stage
3
1. To
access
Stage 3
of
Service Mode 2,
close the door and turn the dishwasher on. The
Start/Stop
light
must
be blinking. If the
Start/Stop
light is
not
blinking, press and hold
the
Start/Stop
button for at least 3 seconds to exit the cycle. The
Start/Stop
light should
now be blinking.
2. Press and hold the
Start/Stop
button while turning the dishwasher on. Release the
Start/Stop
button and immediately press it 2 more times. Flashing
Intake/Drain
and
Salt
lights indicate successful accessing of
Service Mode 2
.
3. Press
the
Top solo
button twice. Flashing
Intake/Drain
and
Salt
lights and a lit
End
light
indicate successful accessing of
Stage 3
of
Service Mode 2.
4. Use the arrow
buttons to scroll to the appropriate program function.
5. Use
the
Top solo
button to change the status of the function.
6. To save, press the
Start/Stop
button twice.
Program
Function
Options
Program light status
Pots & Pans
Increase temperature
66 Flashing
72 Lit
Sani Wash
Water softener
On Flashing
Off Lit
Normal Plus
Interim rinses
1 rinse
Flashing
2 rinses
Lit
Normal
Increase water level
Norm Flashing
Increase Lit
Economy Dishwasher
width
24” Flashing
18” Lit
