![background image](http://html.mh-extra.com/html/miele/g-600-series/g-600-series_technical-information_234715096.webp)
Technical Information
96
G 600/G 800
6.8.4.2.1
Starting the Test Program, Program Start with Reactivation
1. Enter
Service Mode 1
.
2. Turn the program selector switch to the 11 o'clock position. The test program starts
automatically (for the program sequence, see the switching plan).
3. After a test program interruption or after the end of the test program, the selected
program may start with reactivation before the pre-wash. This will be indicated by a lit
Softener
LED.
6.8.4.3
Service Mode 2
1. Switch off the appliance, close the door and turn the program selector to
Stop
.
2. Press and hold the
Top solo
button while switching the appliance on with the
on/off switch.
3. Release the
Top solo
button within 1 second, then press and release the
Top
solo
button twice.
4. The
On
LED lights up and the
Softener
and
Wash
LEDs flash (if this is not the
case, repeat Steps 1 through 3).
5. Turn the program selector switch to the desired setting in accordance with Table
6-23.
6. To save the option: Turn the program selector switch to
Stop
and switch the
appliance off.
Program selector switch
position (o’clock)
Function
Programmable
options
Top solo LED
1
Fault codes
-
Flashes
2
Program index
-
Flashes
4
Flow meter
-
Flashes
5
Temperature
increase
150°F
1
Off
160°F On
6
Softener
With
1
Off
Without On
7
Appliance width
(water intake)
24” Off
18” On
8
Water quantity
(EPLZ 520 only)
Normal
1
Off
Increased On
Table 6-23:
G 680, G 880 Service Mode 2 Functions
1
Standard setting
6.8.4.3.1
Fault Code Display and Deletion
1. Access
Service Mode 2
.
2. Turn the program selector switch to the 1 o'clock position. The
Top solo
LED flashes.
3. Press
the
Top solo
button. The
Top solo
LED lights up when the selector switch is
turned to the position where a fault is registered. Refer to Table 6-24.
4. Turn the program selector switch to
Stop
and switch the appliance off to delete the fault
code.