Technical Information
121
G 600/G 800
6.8.11.3.2 Stage 2
1. To
access
Stage 2
of
Service Mode 2
,
close the door and turn the dishwasher on. The
Start/Stop
light
must
be blinking. If the
Start/Stop
light is
not
blinking, press and hold
the
Start/Stop
button for at least 3 seconds to exit the cycle. The
Start/Stop
light should
now be blinking.
2. Press and hold the
Delay Start
and
Start/Stop
buttons while turning the dishwasher on.
Flashing
Drain
and
Salt
lights and a lit
Rinse
light indicate successful accessing of
Service Mode 2
.
3. Press
the
Top solo
button once. Flashing
Drain
and
Salt
lights and a lit
Main wash
light
indicate successful accessing of
Stage 2
of
Service Mode 2
.
4. The display will indicate the current operating hours.
6.8.11.3.3 Stage
3
1. To
access
Stage 3
of
Service Mode 2,
close the door and turn the dishwasher on. The
Start/Stop
light
must
be blinking. If the
Start/Stop
light is
not
blinking, press and hold
the
Start/Stop
button for at least 3 seconds to exit the cycle. The
Start/Stop
light should
now be blinking.
2. Press and hold the
Delay Start
and
Start/Stop
buttons while turning the dishwasher on.
Flashing
Drain
and
Salt
lights and a lit
Rinse
light indicate successful accessing of
Service Mode 2
.
3. Press
the
Top solo
button twice. Flashing
Drain
and
Salt
lights and a lit
Rinse
light
indicate successful accessing of
Stage 3
of
Service Mode 2.
4. The display will indicate the current electronic version.
5. To save, press the
Start/Stop
button twice.
6.8.11.3.4 Stage
4
1. To
access
Stage 4
of
Service Mode 2,
close the door and turn the dishwasher on. The
Start/Stop
light
must
be blinking. If the
Start/Stop
light is
not
blinking, press and hold
the
Start/Stop
button for at least 3 seconds to exit the cycle. The
Start/Stop
light should
now be blinking.
2. Press and hold the
Delay Start
and
Start/Stop
buttons while turning the dishwasher on.
Flashing
Drain
and
Salt
lights and a lit
Rinse
light indicate successful accessing of
Service Mode 2
.
3. Press
the
Top solo
button three times. Flashing
Drain
and
Salt
lights and a lit
End
light
indicate successful accessing of
Stage 4
of
Service Mode 2.
4. Use the arrow
buttons to scroll to the appropriate program function.
5. Use
the
Top solo
button to change the status of the function.
6. To save, press the
Start/Stop
button twice.
Program
Function
Options
Program light status
Pots & Pans
Increase temperature
66 Flashing
72 Lit
Sani Wash
Water softener
On Flashing
Off Lit
Normal Plus
Interim rinses
1 rinse
Flashing
2 rinses
Lit
Normal
Increase water level
Norm Flashing
Increase Lit
China & Crystal
Extended drying
Off Flashing
On
1
Lit
Economy
EGS
With Off
Without On
Table 6-61:
G 896 Service Mode 2 Functions
1
Can only be set if “+14 min” is selected in programming mode. See Section 6.8.11.1.2.
