![background image](http://html.mh-extra.com/html/miele/advanta-g2020sc/advanta-g2020sc_technical-information_234507016.webp)
Technical Information
16
G1000 / G2000 Dishwashers
GND To ground connector.
Hard wiring the dishwasher should only be done if required by electrical code.
Do not cut the plug off the power supply cord / plug and connect it directly to the
house wiring under any circumstances. This voids the warranty.
For hard wiring, the power cord must be removed from the appliance by
disconnecting the cord from the terminal box located at the lower left front of the
dishwasher, behind the Toekick and Service Panel. Pass the permanent power
supply cable through the strain relief and secure it directly to the terminal box.
THIS APPLIANCE MUST BE GROUNDED
1.4.2
Plumbing Connections
1.4.2.1
Intake Connection
The appliance is equipped with a five (5) foot long Double WaterProof System Intake
Hose; equipped with a ¾ inch female hose connection; for connection to a ¾ inch
male hose thread water supply valve.
1.4.2.2
Drain Connection
The appliance is equipped with a five (5) foot long Drain Hose for connection to a ¾
inch drain nipple.
1.4.3
Dimensions