56
SyncServer 600 Series User’s Guide
098-00720-000 Revision B – April, 2016
Chapter 3
STATUS Button
LAN Status Screens
Multiple screens, four for each network port. There are two screen for IPv4 and two
for IPv6. Use Next> to see the entire IP address configuration.
State: Shows “Up” if the port is enabled and “Down” if the port is disabled.
IP: IP address for the port
SM: Subnet mask
GW: Gateway address
Hardware Clock Status Screen
Hardware Clock and Input Reference status.
GPS Receiver Status Screen
GPS receiver status.
GNSS Satellites next>
GPS: 1
Max CNo: 2
1= number of GPS satellites currently “used” (the number being tracked). Value can
be from 0 – 32.
2= The highest CNo (Carrier-to-Noise ratio) of all satellites that were included in
result 1.
SyncServer Status Screen
Hardware and software identification. Software upgrade availability.
Model: The model number.
S.N.: The serial number.
Version: The software "Release Version" number.
