Microsemi SyncServer S600, User Manual

Page: 111 / 252

098-00720-000 Revision B – April, 2016 SyncServer 600 Series User’s Guide 109
Chapter 5 Command Line Interface (CLI)
This chapter describes the CLI command conventions, the prompts, line editing
functions, and command syntax. The CLI command functions and features are
listed alphabetically.
In This Chapter

SyncServer S6x0 CLI Command Set
SyncServer S6x0 CLI Command Set
This section provides an alphabetical listing and details of all CLI commands. Both
the serial CONSOLE CLI commands and telnet CLI commands should be identical.
Table 5-1. CLI Commands for
SyncServer S6x0
Command Similar Web Interface Location
set clock Timing > Input Control
set configuration
Admin > Configuration Backup / Restore / Reset
F9 - Time on Request See upper right corner of Dashboard screen
F50 - GPS Receiver LLA/XYZ
Position
References > GNSS Config
F73 - Alarm Status
Click on the Arrow for the Alarm(s) tab
to display Alarms status
show gnss status
Click on the Arrow for the GNSS tab
to display GNSS status
halt system
Admin > Services / Sys. Control
history Logs > Events
show image
Admin > Configuration Backup / Restore / Reset
set image Admin > Configuration Backup / Restore / Reset