098-00720-000 Revision B – April, 2016
SyncServer 600 Series User’s Guide
31
Chapter 1 Overview
Physical Description
Figure 1-14. Timing I/O Module BNC Connectors
Figure 1-15. Signal Types for Timing I/O Module
Power and Ground Connections
The SyncServer S6x0 is available with either single or dual 120/240 VAC power.
The SyncServer S6x0 is not equipped with a Power switch. AC power is controlled
by the unplugging the AC power cord. Frame ground connections on the
SyncServer S6x0 are made on the grounding stud located on the left side of the
rear panel, as identified with the international Ground marking, as shown in
Warning:
To avoid serious personal injury or death, exercise caution
when working near high voltage lines and follow local building
electrical codes for grounding the chassis.
