098-00720-000 Revision B – April, 2016
SyncServer 600 Series User’s Guide
149
Chapter 6 Provisioning
Provisioning NTP Associations
.
Table 6-9. Add a New NTP Association
Method
Steps
Web Interface
NTP > NTPd Config
1. Select the Role with dropdown box as either Server or Peer.
2. Enter the IP address or DNS name of the NTP association.
3. Select the Port with dropdown box, LAN1, LAN2, LAN3 or
LAN4.
4. Click the “Pref” checkbox to set this as a prefer association.
5. Select the Burst setting with the drowndown box as N/A, Burst,
iBurst, or Both.
6. Select the MinPoll value with the drowndown box.
7. Select the MaxPoll value with the drowndown box.
8. Click the
+
button in the right side column to add the
association.
9. Click the
Apply
button to save changes.
10. Click the
Restart
button to make any changes take effect.
CLI
n/a
Front Panel
n/a
