58
SyncServer 600 Series User’s Guide
098-00720-000 Revision B – April, 2016
Chapter 3
MENU Button
Figure 3-5.
Select IPv4 Addressing Type Screen
1.
Static Addr
: Select IPv4address mode for LAN1 port.
If Static Address is selected, the Enter LAN1 Address screen will appear, as
shown in
. After the address is entered press the ENTER button and
you will be prompted to enter the Subnet mask (then ENTER) followed by the
Gateway address. Once the gateway address has been entered the LAN 1 port
will be reconfigured.
2.
DHCP
: Select DHCP addressing type for LAN1 port. DHCP automatically
configures LAN1 with a dynamic IPv4 address.
Figure 3-6.
Enter LAN1 Static IPv4 Address Screen
Display
Selecting Display brings up the Display menu screen on the display, as shown in
.
Figure 3-7.
Display Menu Screen
1.
Set Time
: Enter the UTC date and time using 24-hour format. Select OK to apply
the entered time to the Hardware Clock and not use external time references.
See
.
Figure 3-8.
Set Time Screen
2.
Brightness
: Adjust the brightness of the front panel display. See
.
Figure 3-9.
Set Brightness Screen
