66
SyncServer 600 Series User’s Guide
098-00720-000 Revision B – April, 2016
Chapter 4
Status / Information Windows
Holdover
Same as prior row but specific additional
conditions are met.
This condition occurs if the current
source is the internal oscillator and the
duration in time holdover has exceeded
the time defined by user in the Timing >
Holdover window.
The unit has been in holdover
for more than a user-specified
duration and the holdover is
based on the SyncServer
internal reference.
In this case the Holdover
Sources row will not contain any
green items.
Relocking
SyncServer has selected a qualified
active time input for use and is now in
process of aligning all outputs to it.
Table 4-3. Status - Current Source Details
Item
Status Where it Will
Happen
Details
No current source
Warmup
Directly equal to the common warmup
clock state (to both freq and time)
Table 4-2. Status - Clock State Descriptions
Status Indication
Meaning
Details
