Microsemi SyncServer S600, User Manual, Page: 189 / 252

098-00720-000 Revision B – April, 2016 SyncServer 600 Series User’s Guide 189
Appendix A System Messages
System Notification Messages
J2B Input LOS
(LOSS OF SIGNAL) 102 Minor No J2B Input LOS
J2B Input LOS cleared

Check if cable is
securely connected.

Check signal source
is present and
configured properly.
No action required
Excessive traffic on
port 112 Minor No Excessive traffic on
PORT [1 | 2 | 3 | 4 | 5 6]
Excessive traffic on
PORT [1 | 2 | 3 | 4 | 5 6]

Check traffic level on
network

Check for intrusion
attempts.

Check broadcast
traffic.
(See Footnote 1)
No action required
RESERVED 113

Ethernet Port1 link
down 115 Minor No LAN1 port link down
LAN1 port link down
cleared

Check cable.

Check the box the
interface is
connected to.

Check
Auto-negotiation.
No action required
Ethernet Port2 Port
link down 116 Minor No LAN2 port link down
LAN2 port link down
cleared

Check cable.

Check the box the
interface is
connected to.

Check
Auto-negotiation.
No action required
Table A-1. System Notification Messages (Continued)
Description
Event
ID
Msg
Level
Trans-
itory
MsgText Corrective Action