Microsemi SyncServer S600, User Manual

Page: 57 / 252

098-00720-000 Revision B – April, 2016 SyncServer 600 Series User’s Guide 57
Chapter 3
MENU Button
MENU Button
Pressing the MENU button presents a numbered menu of functions, as shown in
Figure 3-2 .
Figure 3-2. Menu of Functions
LAN1
Selecting LAN1 brings up the Display menu screen on the display, as shown in
Figure 3-3 .
Figure 3-3. Configure LAN1 Screen
1. Configure : Use to select IPv4 or IPv6 address mode for LAN1 port. IPv6
automatically configures LAN1 with a dynamic IPv6 address.
If Configure is selected, the Select LAN1 screen will appear, as shown in Figure
3-4 .
2. On/Off : Use On to enable the LAN1 network port. Off disables the LAN1 network
port for all traffic types.
Figure 3-4. Select LAN1 IP Mode Screen
1. IPv4 : Select IPv4address mode for LAN1 port.
If IPv4 is selected, the Select Addressing Type screen will appear, as shown in
Figure 3-5 .
2. IPv6 : Select IPv6 address mode for LAN1 port.
If IPv6 (DHCPv6) is selected, the SyncServer automatically configures LAN1 with
a dynamic IPv6 address.